fbpx
LED Strip Light

How to Install LED Strip Lights on Ceiling [A Quick Guide]

Installing LED strip lights on the ceiling is a great way to add some extra light and style to your home. Ceiling LED strip lights should definitely not be overlooked!

In this guide, we will walk you through the entire process of installing them, from choosing the right lights to wiring and mounting them. We’ll go through a full LED strip light ceiling installation, and we’ll also give you some tips on how to get the most out of your new lighting.

So, let’s get started!

VIEW OUR CAVELIGHTS RECOMMENDED LED LIGHT STRIPS HERE.


Quick Links


Choosing the Right Lights

Close-up of LED light strip

The first step to install ceiling LED strip lights is to choose the right lights. There are a few things to consider when making your selection:

  • Brightness: How bright do you want your lights to be? LED strip lights are available in a range of brightness levels, from subtle accent lighting to powerful task lighting.
  • Colour: Do you want white light or coloured light? LED strip lights come in both options.
  • Length: How long do you need your lights to be? LED strip lights are available in a variety of lengths, from short strips that are perfect for small spaces to long strips that can light up an entire room.
  • Adhesive backing: Many LED strip lights come with an adhesive backing that makes it easy to install LED strip lighting. However, some lights will require special mounting hardware.
  • Power source: Battery LED strip lights and traditional LED strip lights are both an option, the difference being that one is battery-powered, whereas the other needs to be plugged into an outlet.

Once you’ve considered all of these factors, you’re ready to choose the right LED strip lights for your ceiling.

Wiring and Mounting the Lights

LED light strip being mounted to wall

Now that you’ve selected the perfect lights, it’s time to wire and mount them. Here’s what you need to do for the perfect LED strip light installation:

1. Find the power source

The first step in LED strip lights installation is to find a power source for your lights. If you’re using battery-powered lights, you’ll need to install batteries. If you’re using plug-in lights, you’ll need to locate your lights near an outlet.

To help you plan and locate this, it’s a good idea to sketch out a rough diagram of your room and mark where the outlets are located, as well as the possible locations the strip light can be installed.

2. Cut the strip light to size

Once you’ve found the power source, it’s time to cut your LED strip light to size. Most strip lights come with a built-in cutting guide that makes it easy to get a precise cut.

The best way to cut the strip light is to use a pair of scissors. However, you can also use a utility knife or a sharp pair of wire cutters.

3. Remove the adhesive backing

If your LED strip light has an adhesive backing, now is the time to remove it. To do this, simply peel back the paper backing and expose the adhesive. 

Remember not to peel the backing off completely though – much like when you put a plaster on a cut on your finger, you’ll want to slowly remove the backing as you place it on the surface you are sticking it to.

4. Stick the lights to the ceiling

Now, it’s time to stick the LED strip light to the ceiling. Start at one end of the strip and slowly peel back the adhesive backing as you apply pressure to the strip.

Continue applying pressure until the entire strip is attached to the ceiling.

5. Connect the power supply

The last step is to connect the power supply to your LED strip light. If you’re using battery-powered lights, simply insert the batteries. If you’re using plug-in lights, plug the power cord into the outlet.

And that’s it! You’ve now successfully completed the LED light strip installation process.

Tips and Tricks

LED strip light being measured on wall

Now that you know how to install your LED ceiling strip lights, here are a few tips and tricks to help you get the most out of your new lighting:

1. Use a dimmer switch

Installing a dimmer switch is a great way to instantly change the mood of your room. With a dimmer switch, you can adjust the brightness of your lights to create the perfect ambiance.

2. Use multiple colours

LED strip lights (both indoor and outdoor led strip lights) come in a variety of colors, so don’t be afraid to experiment. Using multiple colours can create a fun and festive atmosphere in your home.

3. Install remote-controlled lights

For ultimate convenience, install LED strip lights with a remote. With a remote, you can easily turn your lights on and off, change the brightness, and even change the colour, all without having to leave your seat.

4. Install motion-sensor lights

Motion-sensor room LED light strips are a great way to add convenience to your home. These lights will automatically turn on when someone approaches, providing a well-lit path that prevents you fumbling around trying to find the light switch!

5. Add a timer

Adding a timer to your strip LED lights is a great way to save energy and money. With a timer, you can set your lights to turn off automatically after a certain period of time.

Installing LED strip lights on your ceiling is a quick and easy way to add style and ambiance to your home.

With a few simple tools, you can transform any room in your house into a beautiful living space. Use these tips and tricks to get the most out of your new lights and create the perfect atmosphere for your home.

VIEW OUR CAVELIGHTS RECOMMENDED LED LIGHT STRIPS HERE.

Related Posts

As an Amazon Associate I earn from qualifying purchases.

One comment

Comments are closed.