fbpx
installing a bathroom light fixture

How to Install a Bathroom Light Fixture [Step-by-Step Guide]

Installing a bathroom light fixture may seem like a daunting task, but with the proper tools and some basic knowledge, it can be accomplished relatively easily.

In this guide, we will walk you through the process of installing a new vanity light fixture in your bathroom. So, whether you are replacing an old fixture or installing a new one, follow these steps and you will be finished in no time. 


Quick Links


What You’ll Need

Step-by-Step Guide

Step 1: Turn off the power to the fixture

Before you begin, it is important to make sure that there is no power running to the fixture. The last thing you want is to be electrocuted while working on the wiring. To do this, locate the circuit breaker box and turn off the power to the bathroom.

Step 2: Remove the old fixture

Once the power is off, you can begin removing the old light fixture.

Start by unscrewing the plate that is covering the wires. Be careful not to lose any of the screws, as you will need them to install the new fixture.

Next, disconnect the wires from the fixture. There are usually two black wires (hot) and two white wires (neutral), but there may also be a green wire (ground). Once the wires are disconnected, you can remove the old fixture.

Step 3: Install the new fixture

Start by attaching the mounting plate to the electrical box with the screws that you removed from the old fixture.

Next, connect the wires to the new fixture. The black wires attach to the brass screws, the white wires attach to the silver screws, and the green wire attaches to the green screw. Once all of the wires are connected, screw in the lightbulb(s) and replace the glass cover (if applicable).

Step 4: Turn on the power and test the fixture

Now that the fixture is installed, you can turn the power back on at the circuit breaker. Once the power is on, flip the switch to test the fixture. If it does not work, double-check all of the connections to make sure they are secure.

Tips and Tricks

  • If you are unsure about any part of the process, it is always best to consult with a professional electrician.
  • Be sure to use the proper type of lightbulb for your fixture. Check the manufacturer’s instructions to determine the correct wattage.
  • When cutting wires, be sure to leave enough wire so that you can make the connections easily.
  • If you are having trouble getting the new fixture to fit, try loosening the screws on the electrical box. This will give you some wiggle room to get the fixture in place.
  • Be sure to tape any exposed wires with electrical tape. This will help to prevent shorts and other problems.

And that’s it! You have now successfully installed a new bathroom wall light fixture. Wasn’t that easy?

In just a few simple steps, you can update the look of your bathroom and brighten up the space. So next time you are in need of how to install vanity new light fixture, don’t be afraid to tackle the project yourself. With this guide, you will be a pro in no time.

How to Install Bathroom Light Fixture Installation without Junction Box 

man installing light fixture

If you don’t have a junction box in your bathroom, then you will need to install one before proceeding with the light fixture installation. Follow these steps to install a new junction box and wire it for your light fixture.

Step 1: Turn off the power to the circuit at the main breaker panel

When working with electricity, it is always important to take precautions and turn off the power before starting any work.

Step 2: Remove the old light fixture

Use a screwdriver to remove the screws that hold the old light fixture in place. Carefully remove the fixture, taking note of how it was wired. You will need to wire the new fixture in the same way.

Step 3: Install the new junction box

Use a drill to create holes for the junction box screws. Insert the junction box into the hole and secure it with screws.

Step 4: Wire the new junction box

Connect the black wire from the light fixture to the black wire in the junction box. Connect the white wire from the light fixture to the white wire in the junction box. Connect the ground wire from the light fixture to the green ground screw in the junction box.

Step 5: Install the new light fixture

Carefully insert the wires into the back of the new light fixture and screw it into place. Turn on the power at the breaker panel and test the light fixture.

Congratulations, you have successfully installed a new bathroom light fixture! If you have any questions or need help with your installation, please feel free to contact a qualified electrician.

Related Posts

As an Amazon Associate I earn from qualifying purchases.